Access Multiplex
2 slots available for 2 plug-in types:
a. 8-port or 4-port U interface compatible to Loop-U 3500
b. 3-port MDSL interface compatible to Loop-H 3900 with line power option Any combinations of n x 64 Kbps data streams can be multiplexed to fill an E1 or T1 line Optional Connection to LAN/WAN or host services Remote configuration and diagnostics Optional GUI NMS with LoopView Optional in-band 64-Kbps management
2-line by 40-character LCD and key pad for local administration, monitoring, and maintenance
LED indicators for each port
Single AC or DC plug-in modules
Remote download of software
SNMP Network Management Systems or
simple terminal supervisory port
Loop-AM3410 is an Access Multiplexer that can combine various digital access interfaces into a single E1 or T1 line for convenient transport and switching. Interfaces include MDSL, and U type. These interfaces are compatible with other Loop products such as Loop-H 3900 for MDSL and Loop-U 3500 for U. Up to 31/24 time slots for the MDSL interface are then multiplexed to fill an E1/T1 line, with full flexibility of time slot assignment. Up to 2 time slots for the U interface are then multiplexed to fill an E1/T1 line, with full flexibility of time slot assignment.
Loop-AM3410 supports local control and diagnostics by using 2-line by 40-character LCD display and keypads on the front panel, or by using a VT-100 terminal connected to the console port. Loop-AM3410 also supports Ethernet, SLIP, Telnet, and SNMP, so that it can be controlled and diagnosed from remote locations as well. Optional in-band management channel and LoopView with GUI are available. In addition to the LCD display, there are one status LED for each U, MDSL interface, and 4 LEDs for the E1 line.
| Model | Description | Note |
|---|---|---|
| Loop-AM3410-E1 | Main Unit with E1 Interface | Must select a main unit with E1 or T1 |
| Loop-AM3410-T1 | Main Unit with T1 Interface | |
| Loop-AM3410-4U | 4-Port IDSL plug-in Module | |
| Loop-AM3410-8U | 8-Port IDSL plug-in Module | |
| Loop-AM3410-3H | 3-Port MDSL plug-in Module | |
| Loop-AM3410-SNMP | Ethernet plug-in Module | Optional |
| Loop-AM3410-SA | Single AC Power Module | Select AC or DC Model For AC choose an appropriate power cord |
| Loop-AM3410-SD | Single DC Power Module |
| Accessories | |
|---|---|
| User's Manual | |
| Loop-AM3410-UM | User's manual (paper, hard copy optional). A CD version of the manual is already included as standard equipment. |
| Power Cord | |
| Loop-ACC-PC-USA | AC power cord for Taiwan/USA |
| Loop-ACC-PC-EU | AC power cord for Europe |
| Loop-ACC-PC-UK | AC power cord for the UK |
| Loop-ACC-PC-AUS | AC power cord for Australia |
| Loop-ACC-PC-CH | AC power cord for China |
For example: Loop-AM3410-E1 Loop-AM3410-U Loop-AM3410-SA For model 3410 for E1 interface with one 8-port IDSL plug-in module, and one single AC power.
Up to 2 plug-in cards, with 3 MDSL interfaces per card. Full duplex with adaptive echo cancellation MDSL line coding Unconditioned 19-26 AWG twisted pair Line rate: 272, 400, 528, 784, 1168, 1552, 2320 for data rates n x 64 Kbps. NOTE: If T1, max n = 24. If E1, max n = 31.
U Interface
Up to 2 plug-in cards
Type Full duplex with echo cancellation Line Type Unconditioned twisted pair 19-26 AWG Line Rate 64 or 128 Kbps Line Coding 2B1Q Connector RJ48C
| Line Rate | 1.544 Mbps 50 bps | Output Signal | DSX1 |
| Line Code | AMI/ B8ZS | Framing | D4/ ESF (selectable) |
| Input Signal | ABAM cable length up to 655 feet | Connector | RJ48C |
| Network Line Interface -E1 | |||
|---|---|---|---|
| Line Rate | 2.048 Mbps 50 ppm | Framing | ITU G.704 |
| Line Code | AMI/ HDB3 (selectable) | Connector | BNC/ RJ48C |
| Input Signal | ITU G.703 to -10dB | Electrical | 75 ohm Coax/ 120 ohm twisted pair |
| Output Signal ITU G.703 | Jitter | ITU G.823 | |
| Ethernet Interface (optional) | |||
| Connector | RJ45 in rear | ||
| Protocol | Telnet and Embedded SNMP | ||
| Front Panel | |||
| Keypad | 4 operation keys plus ACO key | ||
LED 1 per U/ MDSL/ V.35-interface, ACO, Power, SYNC/TEST, LOF, BPV, RAI/AIS LCD 2 lines by 40 characters
Physical / Electrical
Dimensions
432 x 88 x 298 mm (W×H×D)
100-240V, 50/60 Hz AC or Single -48V DC, 30 WattsPower
0-50C
Temperature
0-95%RH (non-condensing)
Humidity
Desk-top stackable, 19” / 23” rack mountable
Mounting
Internal, E1/ T1 Line
Alarm Relay
Alarm Relay, Fuse alarm, and performance alarm
System configuration Parameters
Active Configuration, Stored Configuration, and Default Configuration (Stored in Non-volatile Memory)
Supervisor
RS232, VT-100 - front panel
10 Base-T, SNMP - rear panel SLIP - rear panel In-band 64 Kbps
Performance Registers Last 24 hours performance in 15 minutes interval and last 7 days in 24 hours summary Separate Registers 12 MDSL ports, network, user, and remote site Performance Reports Reports include MDSL port unsync Date & Time, Errored Second, Unavailable Second,
E1 Bursty Errored Second, Severe Errored Second, Degraded Minutes, and Controlled Slip Second. Also available in Statistics (%). Alarm Queue Containing 40 alarm records which record the latest alarm type, location, and date & time Threshold Bursty Seconds, Severely Errored Second, Degraded Minutes
Diagnostics Test Line
Loopback
E1/ T1 interface (Line Loopback, Payload Loopback, Local Loopback) MDSL interface (Payload Loopback, Local loopback) U interface (Local Loopback, Payload Loopback)
Test Pattern E1/ T1 interface (215-1 PRBS, 3-in-24, 1-in-8, 2-in-8, 1:1 patterns) U/ MDSL/ DTE interface (211-1 BERT)
LAN
