Features:

Used with STM1 and DS3 network Different plug-in types

a.: DS3 (28T1/ 21E1)

E3 (16E1)

Circuit protection board for DS3

High density 28T1

e. High density 21E1 DS0 Digital cross-connect between

plug-in ports A - µ coding and signaling conversion Alarm relay Console port, Ethernet, SNMP LED indicators for each port on front

and back sides of the shelf AC or DC redundant power module In-band management, out-band

management Redundant TSI, power and control

board Up to 17 slots for different plug-ins Support for OC3/STM-1 1+1 line Support for DS3 1+1 line & circuit

protection Power consumption: ~110W nominal

CERTIFIED ISO-9001

Loop-V4100 Universal Multiservice Access Platform

Description

Used with STM1 and DS3 networks, Loop-V4100 could provide full STM1 access, OC-3 access, and OC-3 Adddrop. Loop-V4100 has full DS0 cross-connect built inside. The A-µ conversion is also supported. The OC3/STM-1 port could be connected to OC3/STM-1 networks or to Loop-V 4200-28 with OC3/STM-1 port. Three DS3 ports could be connected to DS3 networks or Loop-V 4200-28 with DS3 port. Local control and diagnostics could be supported by using a VT100 terminal connected to the console port. Loop-V4100 also supports Ethernet, Telnet, and SNMP, so that it can be controlled and diagnosed from remote locations.

Data from any port, or any time slot of that port, can be channeled to any port or any time slot of any other port. Digitized voice will be appropriately converted between Alaw and µ-law. Channel associated signaling (CAS) will be appropriately converted between E1 and T1 formats.

The main chassis, which is 5U high rack mountable box, has 2 slots reserved for the main controller board, 4 slots reserved for OC3/STM-1, 6 slots reserved for DS3 ports and 4 slots used for the circuit board protection.

Ordering Information for Loop-V4100

" where OPT=

OPT =	Description		Note
SAA	single optical module with dual uni-directional fiber, 1310 nm, SC optical connector, 30 km reach (Min. /49dB)	y	Use 2 fibers
SDD	single optical module with dual uni-directional fiber, 1550 nm, SC optical connector, 20 km reach (Min. /40dB)	y	Use 2 fibers

Loop-V4100 Product Specification

Time Slot Interchange

Less than 700µs delay One active map, 3 user stored maps

Voice Channel Conversion

A-law to µ-law G.711 CAS signaling transparent (A=0 from E1 becomes A=0 to T1, etc.)

Electrical Power

Field changeable AC or DC, single or dual module, including AC and DC mixed DC: -48 Vdc AC: 90 to 240 VAC, 50/60Hz

Performance monitor

Performance Store The last 24 hours performance in 15-minute intervals

Monitor Registers Line and user

Performance Reports Date & time, error second, degraded minutes, unavailable second, bursty error second, severe error second, controlled slip second, and loss of frame count

Alarm History Date & time, alarm type (master clock loss, RAI, AIS, LOS, BPV, ES, CSS) Bursty seconds, severely errored second, degrade minutes